Coaxial probe tip holder - screw fastened

$60.00
(No reviews yet) Write a Review
SKU:
CTH-SCR
Availability:
In stock
Weight:
0.1 LBS
Shipping:
Calculated at Checkout
Central conductor:
Silver plated copper coated steel
Operating temp range:
-70C to 200C
Minimum bend radius:
1 inch
Nominal inductance:
0.072 uH/ft
Nominal DC resistance:
244 ohms per 1000 feet
Max operating voltage:
750 V RMS
Attenuation @ 1Mhz:
0.026 dB/ft
Attenuation@10Mhz:
0.056 dB/ft
Attenuation@50Mhz:
0.105 dB/ft
Attenuation@100Mhz:
0.140 dB/ft
Attenuation@200Mhz:
0.190 dB/ft
Attenuation@400Mhz:
0.280 dB/ft
Attenuation@700Mhz:
0.370 dB/ft
Attenuation@900Mhz:
0.425 dB/ft
Attenuation @ 1 Ghz:
0.460 dB/ft
Coaxial probe tip holder - screw fastened
  • Probe tip holder/cable:
    • Coax cable: 1.5 meters of RG178, MIL-DTL-17:
      • Coax wire core: silver plated copper coated steel
      • 50 ohm impedance
      • Cable attenuation @ 1Ghz: 0.46dB/ft
      • 2pf cable capacitance @ 100khz
      • Standard BNC connector output
      • Further detailed coax cable specs are found under the "Technical Specifications" tab (above)
    • Metal rod assembly:
      • Two co-linear metal rods separated by a teflon support spacer.
        • First rod is electrically tied to coax inner conductor and functions as probe tip support
          • Screw threaded into exposed rod end
          • Probe tip inserted into perpendicular through hole at threaded end
          • Probe tip is mechanically immobilized with tip screw
        • Second rod is the mechanical support which is inserted into the micropositioner support bracket
          • User inserts 90 degree or so bend as appropiate
    • Entire assembly has a nominal leakage current of 10 pA @ +/- 5V DC
Consumable, there are no returns allowed.